Interface Yatour USB for Toyota with 12 pin BIG plug

Interface Yatour USB for Toyota
with 12 pin BIG plug
(Bluetooth ready)

  The audio interface YATOUR USB for TOYOTA is a system that connects to the port of the original car radio that is meant for CD changer. Works identically to a CD changer. The control interface is from the radio buttons and/or using the steering wheel controls. It can play music files stored on SD cards and USB devices. It also includes an auxiliary port 3.5mm Jack (audio input) to connect other devices like gps, pda, mobile, PC, DVD, iPhone, iPod, etc ...

  This Interface is designed Yatour resistant components and provided a quality chip decoder HI-FI high fidelity to provide maximum performance and powerful sound. Another of the most important features is that it is provided with a special port to connect the Bluetooth module Yatour (not included and sold separately), whose functions are hands-free phone and music playback via Bluetooth.

 The excellent sound quality audio interface and digital YATOUR is higher than a CD without loss of quality or interference. This Multimedia Interface you can upgrade all the original sound system of your vehicle without replacing it with another, and may retain all radio functions of your car (steering wheel controls, radio controls, display functions, etc. ...).

 In short, USB Interface Bluetooth ready YATOUR is a modern system that should be installed in your car, replacing the obsolete CD Changer. It is time to modernize and give practical touch to your car!, you can say goodbye to all your old cd's, saving space in the glove compartment of your car.

Interface YATOUR USB Bluetooth ready.

FEATURES

INSTALLATION DIAGRAM

NOTE: Bluetooth Module YT-BTM and YT-REMO remote control are not included in the package. To purchase these products need to click on the "ACCESSORIES" tab of this product page.

TECHNICAL SPECIFICATIONS

• Module dimension: 92 x 65 x 16.5mm
• Module weight: 90g
• Wire lenght: 95cm
• Auxiliar Jack 3,5mm wire lenght: 50cm
• Input voltage: 11~14.6V DC (recommended 12V DC)
• Ouput voltage: 12V max. DC
• Signal noise: 95Db
• Standby consumption: 3mA
• Operative consumption: 200mA
• Maximum consumption: 600mA
• DAC resolution: 24Bit 192Khz
• Total harmonic distortion: 0.01%
• Frecuency response: 20Hz-20Khz
• Working temperature: -10ºC - 80ºC

PACKAGE CONTENTS

• Interface module
  
• Wires
• Auxiliar 3,5mm wire
  
• User manual (Spanish-english)

IMPORTANT

- If the port for the CD changer radio is occupied by Navigation Systems, auxiliary devices, XM, etc ..., It needs special Y ADAPTER CABLE TOYOTA (YT-TYBY). You can add it to the shopping cart by clicking the "ACCESSORIES" tab on this page.

- If your vehicle has a CD changer and want to keep working with the two devices, you need to buy special cable with YT-MPC TOYOTA plug. You can add it to the shopping cart by clicking the "ACCESSORIES" tab on this page.

For inquiries we have available the Customer service department and online support in available times.